Contact Us - Career Opportunities Bahrain

Click on the links below to find out more about the job vacancies available. You may also apply with us by sending in a complete CV with current & expected salary to mtqos.hr@mtq.com.sg.

We regret to inform that only shortlisted candidates will be notified.

ESTIMATION ENGINEER CUM DRAFTMANPlus

Primary Function

Assist in cost estimation and preparation of quotations for and coordinating repair, service and maintenance works. Prepare, maintain and update all engineering drawings for the company as well as produce support drawings for Production & Sales personnel.

Job Duties and Responsibilities:

  • Responsible for preparation of cost estimates for the service and repair works of oilfield equipment including material requisition and sourcing, calling of tenders of subcontract works, monitoring and control of project costs.
  • Responsible for the preparation of specifications and cost estimation of materials/ labour man-hours.
  • Liaise and coordinate with Operations section to ensure that the Project schedule as required by the customer is met.
  • Preparation of process control travellers
  • Coordinate with the Fabrication operations
  • Follow safety rules at workplace
  • Perform any other related duties as assigned by Immediate Supervisor
  • Take measurement/dimension of equipment/components & prepare drawings with AutoCad and SolidWorks.
  • Prepare detailed manufacturing drawings for Workshop to manufacture various API/ASTM/ASME specification/design products.
  • Assist Sales personnel to prepare draft drawings for quotation purposes.
  • Assist Quality Control personnel to prepare drawings for inspections.
  • Prepare architectural drawings e.g. building site drawing, workshop machinery layout, safety equipment layout, etc.
  • Prepare design packages in liaison with third party Engineering Services.
  • Manage drawings and design packages register.
  • Perform any other duties as assigned by immediate Supervisor.

Minimum Requirements:

  • Diploma in Mechanical Engineering and above or as deemed sufficient by Management
  • Minimum 4 years similar estimator experience in an engineering repair workshop/ drafting experience for plants and machinery or as deemed sufficient by Management
  • AutoCAD and SolidWorks.
  • Ability to read, interpret and draw detailed engineering drawings for manufacture and assembly.
  • API 6A, 16A & 7-1 experience preferred but not essential.

Interested candidates, please email detailed CV complete with current & expected salary to mtqos.hr@mtq.com.sg

MACHINISTPlus

Primary Function

Produce parts by using machine tools and material in accordance with specifications

Job Duties and Responsibilities

  • Receive daily work instructions from immediate supervisor
  • Read work specifications and drawings a stated in process Control Travellers
  • Do process planning and time estimation
  • Withdraw tools and materials from store
  • Transport and set up work piece using overhead cranes and other lifting tools
  • Perform rough cut, check dimension before proceed for cutting
  • Conduct in process checking and trouble shooting
  • Conduct final inspection upon completion of work
  • Maintain daily housekeeping
  • Follow safe work practices in all aspect of work
  • Maintain machine tools and all related equipment in good condition
  • Perform any other duties as assigned by immediate Supervisor

Minimum Requirements:

  • Minimally a Diploma in mechanical or its equivalent, or as deemed sufficient by Management

Interested candidates, please email detailed CV complete with current & expected salary to mtqos.hr@mtq.com.sg

QC FOREMAN (MECHANICAL & NDE)Plus

Job Duties and Responsibilities

  • Lead a team of Inspectors to utilize their experience and ensure that the work is completed in the safest and quickest manner
  • Assign jobs to inspectors and ensure that the inspection process meets the requirements
  • Review of Material Test Certificates to meet the standard and specification requirements
  • Ensure that Incoming, In-process (Visual and Dimensional) are in compliance with industry standards and Client Requirements and Drawings
  • Perform Non-Destructive Examination (LPI, MPI etc.) and Hardness Testing
  • Ensure final traceability transfer and monogramming on Equipment
  • Review Hydro-testing Charts
  • Perform Surface Preparation and Painting inspections
  • Review all the relevant reports and records before final release for dispatch
  • Preparation of relevant Inspection reports and records
  • Provide Inspection results and Photographs to QC Admin for Preparation of Data Books
  • Report Non-conformances during Inspections.
  • Update the log of monogrammed Equipment
  • Manage the Gauge Room and ensure that the equipment is good working condition.
  • Perform work order review and convey the knowledge to QC personnel.
  • Control of Calibration for all inspection Equipment
  • Practice daily housekeeping at workplace
  • Conduct internal training as and when required
  • Perform any other task as assigned by the Supervisor / Manager.

Minimum Requirements:

  • Diploma / Degree in Mechanical Engineering or relevant experience deemed sufficient by Management
  • Strong leadership & communication skills are essential
  • Familiar with the following standards and certifications – API, NACE; ASME; ISO 9001; OHSAS 18001 etc
  • Experience in NDE practices is preferred but not essential
  • Experience in coating/painting inspection is preferred but not essential
  • Prior experience in dimensional inspection is an added advantage

Interested candidates, please email detailed CV complete with current & expected salary to mtqos.hr@mtq.com.sg

QC INSPECTOR (MECHANICAL & NDE)Plus

Job Duties and Responsibilities

  • Perform Initial inspection for API 6A, API 16A components and provide recommendations for recertification
  • Perform In-process/Final inspection and report to the immediate supervisor upon product acceptance or rejection
  • Perform Dimensional Inspection using Co-ordinate Measuring Machine(CMM)
  • Perform Non-Destructive Examination (LPI, MPI & UT) and generate NDE Reports
  • Perform Hardness Testing and generate reports
  • Perform hard stamping and applicable monogram
  • Witness and review Hydro & gas testing Charts.
  • Perform Surface Preparation and Coating/Painting inspections
  • Review all the relevant reports and records before final release for dispatch
  • Prepare and compile data packages
  • Report Non-conformances during inspections
  • Monitor and maintain records of QC tools & equipment
  • Practice daily housekeeping at workplace.
  • Perform any other task as assigned by immediate Supervisor / Manager.

Minimum Requirements:

  • Mechanical Diploma Holder or equivalent, or as deemed sufficient by Management
  • Minimum 2 years of relevant Experience, or as deemed sufficient by Management
  • Possesses certifications in Level II MT, PT, RT, UT

Interested candidates, please email detailed CV complete with current & expected salary to mtqos.hr@mtq.com.sg

WELDERPlus

Primary Function

Perform welding, gouging, and fabrication work in accordance to requirements specified in the manufacturing drawings

Job Duties and Responsibilities

  • Receive daily work instructions from immediate supervisor/Foreman/Assistant Foreman
  • Read blue prints
  • Draw materials from store
  • Transport and set up work piece using overhead cranes or other lifting tools
  • Choose the best welding method in accordance to the welding procedure and requirement specified in manufacturing drawings and process controller travellers
  • Ensure that welds comply with the non-destructive test requirements carried out by independent or in-house Quality Control requirements
  • Remove slag after welding
  • Control the usage of welding electrodes, wires, and flux, and avoid unnecessary wastage
  • Ensure that electrodes are preheated before they are used for welding
  • Ensure compliance with EHS issues, particularly PPE
  • Report to immediate supervisor when abnormalities occur during the welding process
  • Maintain all welding equipment in good working condition
  • Ensure that completion dates of products are met
  • Ensure that welding cables are not coiled and only required lengths are in use during welding
  • Ensure that extension cables that are not in use are properly coiled at assigned areas
  • Record welding area against drawing/sketch for submission to Quality Control (weld data record)
  • Maintain daily housekeeping at workplace
  • Ensure that tools and equipment are in good working condition
  • Follow safe work practices in all aspect of work
  • Perform any other related duties as assigned by immediate Supervisor

Minimum Requirements:

Trade Certificate in General Welding or completed Primary Education with experience in Welding, or as deemed sufficient by Management

Interested candidates, please email detailed CV complete with current & expected salary to mtqos.hr@mtq.com.sg